[Cialug] Asterisk Config Woes

[Tom Pohl]

What's your zapata.conf look like?  It needs to be setup as if you  
had a regular PRI.

-Tom

On Oct 25, 2007, at 5:31 PM, Jonathan C. Bailey wrote:

> I'm trying to set up a new Asterisk box and seem to be having an  
> issue with the TDMoE setup. I've got my Sangoma card (ch 1-12)  
> working, but can't seem to get the T1 working over TDMoE. The  
> remote device, a foneBRIDGE2 is sending data but a zap show  
> channels only shows the Sangoma channels... Any ideas? ztdynamic  
> and ztd_eth are loaded...
>
>
> [trunkgroups]
>
> [channels]
> context=default
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> canpark=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
> rxgain=0.0
> txgain=0.0
> group=1
> callgroup=1
> pickupgroup=1
> immediate=no
>
> ;Sangoma A400 [slot:7 bus:1 span:1]
> context=from-zaptel
> group=0
> signalling = fxs_ks
> channel => 1
>
> context=from-zaptel
> group=0
> signalling = fxs_ks
> channel => 2
>
> ********CUT - goes to CH 12***************88
> ;foneBRIDGE2
> group=2
> signalling=pri_cpe
> dynamic=eth,eth0/00:50:c2:65:d0:3c/0,24,1
> dynamic=eth,eth0/00:50:c2:65:d0:3c/1,24,2
> bchan=1-23
> dchan=24
> bchan=25-47
> dchan=48
> loadzone=us
> defaultzone=us
> channel => 1-48
>
> Jonathan Bailey
> Webmaster, Marshall County, Iowa
> E: jbailey at co.marshall.ia.us
> A: 1 E Main St, Marshalltown, IA 50158
> P: 641-844-2804
> C: 515-988-1021
>
> _______________________________________________
> Cialug mailing list
> Cialug at cialug.org
> http://cialug.org/mailman/listinfo/cialug