[Cialug] Asterisk Config Woes

[Jonathan C. Bailey]

I'm trying to set up a new Asterisk box and seem to be having an issue with the TDMoE setup. I've got my Sangoma card (ch 1-12) working, but can't seem to get the T1 working over TDMoE. The remote device, a foneBRIDGE2 is sending data but a zap show channels only shows the Sangoma channels... Any ideas? ztdynamic and ztd_eth are loaded...


[trunkgroups]

[channels]
context=default
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no

;Sangoma A400 [slot:7 bus:1 span:1]
context=from-zaptel
group=0
signalling = fxs_ks
channel => 1

context=from-zaptel
group=0
signalling = fxs_ks
channel => 2

********CUT - goes to CH 12***************88
;foneBRIDGE2
group=2
signalling=pri_cpe
dynamic=eth,eth0/00:50:c2:65:d0:3c/0,24,1
dynamic=eth,eth0/00:50:c2:65:d0:3c/1,24,2
bchan=1-23
dchan=24
bchan=25-47
dchan=48
loadzone=us
defaultzone=us
channel => 1-48

Jonathan Bailey
Webmaster, Marshall County, Iowa
E: jbailey at co.marshall.ia.us
A: 1 E Main St, Marshalltown, IA 50158
P: 641-844-2804
C: 515-988-1021