[DM-MUG] Need help Installing ethernet card in old mac

[Ray Bowler]

On the back there are two tabs sticking out. There are two screws 
near them. Screw them out then gently pull on the tabs. The whole 
logic board pulls out. Recently I had to gently pry around the edges 
with a screw driver to get it stared. The PCI slots are on the right 
hand side, one above the other.

At 1:45 PM -0600 2/20/07, Roses Derise wrote:
>Hey, Jon, Thanks for the info. However, my husband (who is even less
>computer savvy than me!) got the numbers wrong--its a PowerMac 6500.
>
>Any help with this one?
>Thanks.
>Roses
>
>
>On 2/20/07 1:05 PM, "Jon Thompson" <jon at mac-consultant.com> wrote:
>
>>  There should be six thumb screws in the back.  Then the case slides
>>  forward (I usually hit it on both sides with my hands to open it up.)
>>
>>  Next, there is a brace that you will pinch to open.  Now you have
>>  access to the PCI slots.
>>
>>  Reverse instructions to get it back together.
>>
>>  Also, I may have missed something, as it has been many years since
>  > I've thrown away my 9500, much less opened it up.
>

-- 
Ray Bowler

rbowler.home.mchsi.com