[Cialug] Remove Thermal Paste?

[Barry Von Ahsen]

note to self: politely decline Murray's baked goods ;)


-barry


On 04/03/2013 07:57 PM, murraymckee at wellsfargo.com wrote:
> I'd recommend just dunking it in a shallow pan of gasoline.  Use a nylon, brass, or steel bristled brush, in order of increasing aggressiveness, while holding the heat sink under the surface of the gas to remove the goo.  Sometimes it is necessary to let it soak overnight.  Cover the pan with aluminum foil to keep the gas from evaporating too fast.  I find a 9" X 9" baking pan works great.  Just wash the pan and get it back into the kitchen drawer before the wife gets home.  That's what I do for the farm machinery parts that need cleaned at any rate.
> 
> NOTE:  DO this outside, and NO, inside the garage, even with the overhead door open, does NOT count as outside.  And for heaven's sake, don't do it in the basement next to the water heater, like the young fellow did who bought the house I grew up in.  This is a nasty NO - NO.
> 
> Murray R. McKee
> 
> Operating Systems Analyst
> Mainframe/Midrange Services
> 
> Wells Fargo Compute Platform Services  |  800 Walnut Street  |  Des Moines, IA 50309-3605
> MAC N0001-037
> Tel 515-557-6127 |  Cell 515-343-6630 |  Fax 515-557-6046 | Text pager: 5153436630 at vtext.com 
> 
> MurrayMcKee at WellsFargo.com
> 
> -----Original Message-----
> From: cialug-bounces at cialug.org [mailto:cialug-bounces at cialug.org] On Behalf Of Todd Walton
> Sent: Wednesday, April 03, 2013 6:54 PM
> To: Central Iowa Linux Users Group
> Subject: [Cialug] Remove Thermal Paste?
> 
> How does one go about carefully and efficiently removing thermal paste from a heatsink so that it can be re-used on a new CPU?  Any suggestions?
> 
> --
> Todd
> _______________________________________________
> Cialug mailing list
> Cialug at cialug.org
> http://cialug.org/mailman/listinfo/cialug
> _______________________________________________
> Cialug mailing list
> Cialug at cialug.org
> http://cialug.org/mailman/listinfo/cialug