[Cialug] Pandaboard ES and ubuntu 11.10

[Dan Hockey]

My Chumby one runs in read only mode. in order to write to it...
mount -o remount,rw /

then back to read only...
mount -o remount,ro /
-dan



--- On Sat, 2/18/12, David Champion <dchamp1337 at gmail.com> wrote:

From: David Champion <dchamp1337 at gmail.com>
Subject: Re: [Cialug] Pandaboard ES and ubuntu 11.10
To: "Central Iowa Linux Users Group" <cialug at cialug.org>
Date: Saturday, February 18, 2012, 4:00 PM

Is it possible that you're not writing the config to the SD card? Maybe
it's mounted Read Only? You may have better luck finding answers on the
Pandaboard resources.

I'm looking forward to the Raspberry Pi, which should be available for
purchase RSN -  http://www.raspberrypi.org/  - a similar project, but the
cost is only $35 per board instead of $195 for a Pandaboard.

-dc

On Thu, Feb 16, 2012 at 12:55 PM, Jim Erickson <jimerickso at gmail.com> wrote:

> i have followed the ubuntu wiki to install
> ubuntu-11.10-preinstalled-desktop-armel+omap4.img to a sdhc card.
> insert card in panadaboard and it boots fine. but it only boots to the
> system configuration session over and over no matter how many times i
> go through the configuration. how do i get it to boot to a login
> screen?
> _______________________________________________
> Cialug mailing list
> Cialug at cialug.org
> http://cialug.org/mailman/listinfo/cialug
>
_______________________________________________
Cialug mailing list
Cialug at cialug.org
http://cialug.org/mailman/listinfo/cialug