[Cialug] Ubuntu Laptop
Terry A. Haimann
terry at HaimannOnline.com
Fri Dec 18 23:38:25 CST 2009
My wifes Ubuntu laptop has become very slow to boot. I also see that I
canno longer ssh into it. I have copied the dmesg output, I hope it
helps.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-16-generic (buildd at rothera) (gcc
version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #53-Ubuntu SMP Tue Dec 8
04:01:29 UTC 2009 (Ubuntu 2.6.31-16.53-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000ba085000 (usable)
[ 0.000000] BIOS-e820: 00000000ba085000 - 00000000ba088000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ba088000 - 00000000bbb05000 (usable)
[ 0.000000] BIOS-e820: 00000000bbb05000 - 00000000bbb3f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bbb3f000 - 00000000bbba6000 (usable)
[ 0.000000] BIOS-e820: 00000000bbba6000 - 00000000bbbbf000 (reserved)
[ 0.000000] BIOS-e820: 00000000bbbbf000 - 00000000bbbe9000 (usable)
[ 0.000000] BIOS-e820: 00000000bbbe9000 - 00000000bbbff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bbbff000 - 00000000bbc00000 (usable)
[ 0.000000] BIOS-e820: 00000000bbc00000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0xbbc00 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-CFFFF uncachable
[ 0.000000] D0000-DFFFF write-protect
[ 0.000000] E0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0BBC00000 mask FFFC00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000
(usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000ba085000 (usable)
[ 0.000000] modified: 00000000ba085000 - 00000000ba088000 (ACPI NVS)
[ 0.000000] modified: 00000000ba088000 - 00000000bbb05000 (usable)
[ 0.000000] modified: 00000000bbb05000 - 00000000bbb3f000 (ACPI NVS)
[ 0.000000] modified: 00000000bbb3f000 - 00000000bbba6000 (usable)
[ 0.000000] modified: 00000000bbba6000 - 00000000bbbbf000 (reserved)
[ 0.000000] modified: 00000000bbbbf000 - 00000000bbbe9000 (usable)
[ 0.000000] modified: 00000000bbbe9000 - 00000000bbbff000 (ACPI data)
[ 0.000000] modified: 00000000bbbff000 - 00000000bbc00000 (usable)
[ 0.000000] modified: 00000000bbc00000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] modified: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 378a7000 - 37fefcfc
[ 0.000000] Allocated new RAMDISK: 008ad000 - 00ff5cfc
[ 0.000000] Move RAMDISK from 00000000378a7000 - 0000000037fefcfb to
008ad000 - 00ff5cfb
[ 0.000000] ACPI: RSDP 000fe020 00024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT bbbfe120 0006C (v01 HPQOEM SLIC-MPC
00000001 01000013)
[ 0.000000] ACPI: FACP bbbfd000 000F4 (v04 HPQOEM SLIC-MPC 00000001
MSFT 000F4240)
[ 0.000000] ACPI: DSDT bbbef000 09DD0 (v01 INSYDE Montevin 00000001
INTL 20051117)
[ 0.000000] ACPI: FACS bbb12000 00040
[ 0.000000] ACPI: HPET bbbfc000 00038 (v01 INSYDE SLIC-MPC 00000001
MSFT 000F4240)
[ 0.000000] ACPI: APIC bbbfb000 0006C (v02 INSYDE 00000001
TFSM 000F4240)
[ 0.000000] ACPI: MCFG bbbfa000 0003C (v01 INSYDE 00000001
TFSM 000F4240)
[ 0.000000] ACPI: ASF! bbbf9000 000A5 (v32 INTEL HCG 00000001
TFSM 000F4240)
[ 0.000000] ACPI: SLIC bbbee000 00176 (v01 HPQOEM SLIC-MPC 00000001
SLIC 000F4240)
[ 0.000000] ACPI: BOOT bbbed000 00028 (v01 INSYDE INSYDE
00000001 00000001)
[ 0.000000] ACPI: SSDT bbbec000 002C6 (v01 INTEL SataAhci 00001000
INTL 20051117)
[ 0.000000] ACPI: SSDT bbbe9000 00655 (v01 PmRef CpuPm 00003000
INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2116MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==>
[0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==>
[0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==>
[0000100000 - 00008a80a0]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==>
[000009fc00 - 0000100000]
[ 0.000000] #5 [00008a9000 - 00008ac208] BRK ==>
[00008a9000 - 00008ac208]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==>
[0000007000 - 0000008000]
[ 0.000000] #7 [00008ad000 - 0000ff5cfc] NEW RAMDISK ==>
[00008ad000 - 0000ff5cfc]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==>
[0000008000 - 000000f000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000bbc00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[7] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000ba085
[ 0.000000] 0: 0x000ba088 -> 0x000bbb05
[ 0.000000] 0: 0x000bbb3f -> 0x000bbba6
[ 0.000000] 0: 0x000bbbbf -> 0x000bbbe9
[ 0.000000] 0: 0x000bbbff -> 0x000bbc00
[ 0.000000] On node 0 totalpages: 768815
[ 0.000000] free_area_init_node: node 0, pgdat c0784940, node_mem_map
c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4233 pages used for memmap
[ 0.000000] HighMem zone: 537357 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 -
0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap:
c0000000:38000000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c2788000, static data 35612
bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 762806
[ 0.000000] Kernel command line:
root=UUID=fed20c2d-0fbe-4597-ad8d-da0d2f092646 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 15380480 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't
want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:000bbc00)
[ 0.000000] Memory: 3018892k/3076096k available (4566k kernel code,
55484k reserved, 2142k data, 540k init, 2166360k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB)
[ 0.000000] .data : 0xc0575bb4 - 0xc078d3c8 (2142 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0575bb4 (4566 kB)
[ 0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0,
CPUs=4, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:440
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1994.962 MHz processor.
[ 0.001310] Console: colour VGA+ 80x25
[ 0.001313] console [tty0] enabled
[ 0.001478] hpet clockevent registered
[ 0.001482] HPET: 4 timers in total, 0 timers will be used for
per-cpu timer
[ 0.001489] Calibrating delay loop (skipped), value calculated using
timer frequency.. 3989.92 BogoMIPS (lpj=7979848)
[ 0.001506] Security Framework initialized
[ 0.001525] AppArmor: AppArmor initialized
[ 0.001532] Mount-cache hash table entries: 512
[ 0.001652] Initializing cgroup subsys ns
[ 0.001656] Initializing cgroup subsys cpuacct
[ 0.001660] Initializing cgroup subsys memory
[ 0.001666] Initializing cgroup subsys freezer
[ 0.001669] Initializing cgroup subsys net_cls
[ 0.001682] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.001684] CPU: L2 cache: 1024K
[ 0.001686] CPU: Physical Processor ID: 0
[ 0.001688] CPU: Processor Core ID: 0
[ 0.001691] mce: CPU supports 6 MCE banks
[ 0.001699] CPU0: Thermal monitoring enabled (TM2)
[ 0.001702] using mwait in idle threads.
[ 0.001708] Performance Counters: Core2 events, Intel PMU driver.
[ 0.001716] ... version: 2
[ 0.001717] ... bit width: 40
[ 0.001719] ... generic counters: 2
[ 0.001720] ... value mask: 000000ffffffffff
[ 0.001722] ... max period: 000000007fffffff
[ 0.001724] ... fixed-purpose counters: 3
[ 0.001725] ... counter mask: 0000000700000003
[ 0.001731] Checking 'hlt' instruction... OK.
[ 0.018709] ACPI: Core revision 20090521
[ 0.036411] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.077645] CPU0: Intel Pentium(R) Dual-Core CPU T4200 @
2.00GHz stepping 0a
[ 0.080001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 3989.95
BogoMIPS (lpj=7979910)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 1024K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new
0x7010600070106
[ 0.165401] CPU1: Intel Pentium(R) Dual-Core CPU T4200 @
2.00GHz stepping 0a
[ 0.165417] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.168021] Brought up 2 CPUs
[ 0.168023] Total of 2 processors activated (7979.87 BogoMIPS).
[ 0.168074] CPU0 attaching sched-domain:
[ 0.168077] domain 0: span 0-1 level MC
[ 0.168079] groups: 0 1
[ 0.168084] CPU1 attaching sched-domain:
[ 0.168086] domain 0: span 0-1 level MC
[ 0.168088] groups: 1 0
[ 0.168161] Booting paravirtualized kernel on bare hardware
[ 0.168205] regulator: core version 0.5
[ 0.168205] Time: 22:48:21 Date: 12/18/09
[ 0.168205] NET: Registered protocol family 16
[ 0.168209] EISA bus registered
[ 0.168218] ACPI FADT declares the system doesn't support PCIe ASPM,
so disable it
[ 0.168221] ACPI: bus type pci registered
[ 0.168286] PCI: MCFG configuration 0: base f8000000 segment 0 buses
0 - 63
[ 0.168289] PCI: MCFG area at f8000000 reserved in E820
[ 0.168291] PCI: Using MMCONFIG for extended config space
[ 0.168293] PCI: Using configuration type 1 for base access
[ 0.169268] bio: create slab <bio-0> at 0
[ 0.172642] ACPI: EC: Enabling special treatment for EC from MSI.
[ 0.172644] ACPI: EC: Look up EC in DSDT
[ 0.176482] ACPI: BIOS _OSI(Linux) query ignored
[ 0.176020] ACPI: EC: non-query interrupt received, switching to
interrupt mode
[ 0.200541] ACPI: Interpreter enabled
[ 0.200541] ACPI: (supports S0 S3 S4 S5)
[ 0.200541] ACPI: Using IOAPIC for interrupt routing
[ 0.240975] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data =
0x62
[ 0.240978] ACPI: EC: driver started in interrupt mode
[ 0.241404] ACPI: No dock devices found.
[ 0.242216] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.242313] pci 0000:00:02.0: reg 10 64bit mmio: [0xd0000000-0xd03fffff]
[ 0.242321] pci 0000:00:02.0: reg 18 64bit mmio: [0xc0000000-0xcfffffff]
[ 0.242326] pci 0000:00:02.0: reg 20 io port: [0x5110-0x5117]
[ 0.242369] pci 0000:00:02.1: reg 10 64bit mmio: [0xd2500000-0xd25fffff]
[ 0.242500] pci 0000:00:1a.0: reg 20 io port: [0x50e0-0x50ff]
[ 0.244026] pci 0000:00:1a.1: reg 20 io port: [0x50c0-0x50df]
[ 0.244125] pci 0000:00:1a.2: reg 20 io port: [0x50a0-0x50bf]
[ 0.244226] pci 0000:00:1a.7: reg 10 32bit mmio: [0xd4705c00-0xd4705fff]
[ 0.244299] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.244305] pci 0000:00:1a.7: PME# disabled
[ 0.244365] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd4700000-0xd4703fff]
[ 0.244430] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.244435] pci 0000:00:1b.0: PME# disabled
[ 0.244526] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.244531] pci 0000:00:1c.0: PME# disabled
[ 0.244625] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.244630] pci 0000:00:1c.1: PME# disabled
[ 0.244717] pci 0000:00:1d.0: reg 20 io port: [0x5080-0x509f]
[ 0.244816] pci 0000:00:1d.1: reg 20 io port: [0x5060-0x507f]
[ 0.244916] pci 0000:00:1d.2: reg 20 io port: [0x5040-0x505f]
[ 0.245018] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd4705800-0xd4705bff]
[ 0.245091] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.245097] pci 0000:00:1d.7: PME# disabled
[ 0.245367] pci 0000:00:1f.2: reg 10 io port: [0x5108-0x510f]
[ 0.245375] pci 0000:00:1f.2: reg 14 io port: [0x511c-0x511f]
[ 0.245384] pci 0000:00:1f.2: reg 18 io port: [0x5100-0x5107]
[ 0.245392] pci 0000:00:1f.2: reg 1c io port: [0x5118-0x511b]
[ 0.245400] pci 0000:00:1f.2: reg 20 io port: [0x5020-0x503f]
[ 0.245409] pci 0000:00:1f.2: reg 24 32bit mmio: [0xd4705000-0xd47057ff]
[ 0.245459] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.245464] pci 0000:00:1f.2: PME# disabled
[ 0.245508] pci 0000:00:1f.3: reg 10 64bit mmio: [0xd4706000-0xd47060ff]
[ 0.245528] pci 0000:00:1f.3: reg 20 io port: [0x5000-0x501f]
[ 0.245606] pci 0000:00:1f.6: reg 10 64bit mmio: [0xd4704000-0xd4704fff]
[ 0.245747] pci 0000:01:00.0: reg 10 io port: [0x3000-0x30ff]
[ 0.245775] pci 0000:01:00.0: reg 18 64bit mmio: [0xd0410000-0xd0410fff]
[ 0.245795] pci 0000:01:00.0: reg 20 64bit mmio: [0xd0400000-0xd040ffff]
[ 0.245806] pci 0000:01:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff]
[ 0.245862] pci 0000:01:00.0: supports D1 D2
[ 0.245864] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.245870] pci 0000:01:00.0: PME# disabled
[ 0.245960] pci 0000:00:1c.0: bridge io port: [0x3000-0x4fff]
[ 0.245965] pci 0000:00:1c.0: bridge 32bit mmio: [0xd3700000-0xd46fffff]
[ 0.245974] pci 0000:00:1c.0: bridge 64bit mmio pref:
[0xd0400000-0xd14fffff]
[ 0.246049] pci 0000:02:00.0: reg 10 64bit mmio: [0xd2600000-0xd260ffff]
[ 0.246226] pci 0000:00:1c.1: bridge io port: [0x2000-0x2fff]
[ 0.246232] pci 0000:00:1c.1: bridge 32bit mmio: [0xd2600000-0xd36fffff]
[ 0.246240] pci 0000:00:1c.1: bridge 64bit mmio pref:
[0xd1500000-0xd24fffff]
[ 0.246313] pci 0000:00:1e.0: transparent bridge
[ 0.246347] pci_bus 0000:00: on NUMA node 0
[ 0.246354] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.246656] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 0.246707] ACPI Warning: \_SB_.PCI0.P32_._PRT: Return Package has no
elements (empty) 20090521 nspredef-434
[ 0.246774] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.246876] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.251903] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.252048] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.252181] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.252313] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.252445] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.252576] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.252707] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.252839] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.253038] SCSI subsystem initialized
[ 0.253051] libata version 3.00 loaded.
[ 0.253051] usbcore: registered new interface driver usbfs
[ 0.253051] usbcore: registered new interface driver hub
[ 0.253051] usbcore: registered new device driver usb
[ 0.253051] ACPI: WMI: Mapper loaded
[ 0.253051] PCI: Using ACPI for IRQ routing
[ 0.264008] Bluetooth: Core ver 2.15
[ 0.264013] NET: Registered protocol family 31
[ 0.264014] Bluetooth: HCI device and connection manager initialized
[ 0.264016] Bluetooth: HCI socket layer initialized
[ 0.264018] NetLabel: Initializing
[ 0.264020] NetLabel: domain hash size = 128
[ 0.264021] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.264033] NetLabel: unlabeled traffic allowed by default
[ 0.264066] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.264072] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.281446] pnp: PnP ACPI init
[ 0.281467] ACPI: bus type pnp registered
[ 0.283241] pnp: PnP ACPI: found 9 devices
[ 0.283244] ACPI: ACPI bus type pnp unregistered
[ 0.283248] PnPBIOS: Disabled by ACPI PNP
[ 0.283259] system 00:01: ioport range 0x164e-0x164f has been reserved
[ 0.283263] system 00:01: ioport range 0x600-0x60f has been reserved
[ 0.283265] system 00:01: ioport range 0x610-0x610 has been reserved
[ 0.283268] system 00:01: ioport range 0x800-0x80f has been reserved
[ 0.283271] system 00:01: ioport range 0x810-0x817 has been reserved
[ 0.283274] system 00:01: ioport range 0x820-0x823 has been reserved
[ 0.283276] system 00:01: ioport range 0x830-0x83b has been reserved
[ 0.283279] system 00:01: ioport range 0x400-0x47f has been reserved
[ 0.283282] system 00:01: ioport range 0x500-0x53f has been reserved
[ 0.283285] system 00:01: iomem range 0xf8000000-0xfbffffff has been
reserved
[ 0.283288] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been
reserved
[ 0.283291] system 00:01: iomem range 0xfed10000-0xfed13fff has been
reserved
[ 0.283294] system 00:01: iomem range 0xfed18000-0xfed18fff has been
reserved
[ 0.283297] system 00:01: iomem range 0xfed19000-0xfed19fff has been
reserved
[ 0.283300] system 00:01: iomem range 0xfec00000-0xfec00fff could not
be reserved
[ 0.283303] system 00:01: iomem range 0xfed20000-0xfed3ffff has been
reserved
[ 0.283306] system 00:01: iomem range 0xfed40000-0xfed44fff has been
reserved
[ 0.283309] system 00:01: iomem range 0xfed45000-0xfed8ffff has been
reserved
[ 0.283312] system 00:01: iomem range 0xfee00000-0xfee00fff has been
reserved
[ 0.283315] system 00:01: iomem range 0xff800000-0xff800fff has been
reserved
[ 0.317984] AppArmor: AppArmor Filesystem Enabled
[ 0.318002] pci 0000:01:00.0: BAR 6: no parent found for of device
[0xfffe0000-0xffffffff]
[ 0.318042] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 0.318046] pci 0000:00:1c.0: IO window: 0x3000-0x4fff
[ 0.318053] pci 0000:00:1c.0: MEM window: 0xd3700000-0xd46fffff
[ 0.318058] pci 0000:00:1c.0: PREFETCH window:
0x000000d0400000-0x000000d14fffff
[ 0.318066] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 0.318070] pci 0000:00:1c.1: IO window: 0x2000-0x2fff
[ 0.318076] pci 0000:00:1c.1: MEM window: 0xd2600000-0xd36fffff
[ 0.318082] pci 0000:00:1c.1: PREFETCH window:
0x000000d1500000-0x000000d24fffff
[ 0.318090] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 0.318092] pci 0000:00:1e.0: IO window: disabled
[ 0.318098] pci 0000:00:1e.0: MEM window: disabled
[ 0.318102] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.318118] alloc irq_desc for 21 on node -1
[ 0.318120] alloc kstat_irqs on node -1
[ 0.318125] pci 0000:00:1c.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 0.318131] pci 0000:00:1c.0: setting latency timer to 64
[ 0.318140] alloc irq_desc for 20 on node -1
[ 0.318141] alloc kstat_irqs on node -1
[ 0.318145] pci 0000:00:1c.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 0.318150] pci 0000:00:1c.1: setting latency timer to 64
[ 0.318158] pci 0000:00:1e.0: setting latency timer to 64
[ 0.318163] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.318165] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.318168] pci_bus 0000:01: resource 0 io: [0x3000-0x4fff]
[ 0.318170] pci_bus 0000:01: resource 1 mem: [0xd3700000-0xd46fffff]
[ 0.318173] pci_bus 0000:01: resource 2 pref mem [0xd0400000-0xd14fffff]
[ 0.318175] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.318178] pci_bus 0000:02: resource 1 mem: [0xd2600000-0xd36fffff]
[ 0.318180] pci_bus 0000:02: resource 2 pref mem [0xd1500000-0xd24fffff]
[ 0.318183] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.318185] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
[ 0.318221] NET: Registered protocol family 2
[ 0.318316] IP route cache hash table entries: 32768 (order: 5,
131072 bytes)
[ 0.318621] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.319053] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.319336] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.319339] TCP reno registered
[ 0.319451] NET: Registered protocol family 1
[ 0.319524] Trying to unpack rootfs image as initramfs...
[ 0.501451] Switched to high resolution mode on CPU 1
[ 0.504004] Switched to high resolution mode on CPU 0
[ 0.508878] Freeing initrd memory: 7459k freed
[ 0.512661] Simple Boot Flag value 0x9 read from CMOS RAM was invalid
[ 0.512664] Simple Boot Flag at 0x44 set to 0x1
[ 0.512840] cpufreq-nforce2: No nForce2 chipset.
[ 0.512866] Scanning for low memory corruption every 60 seconds
[ 0.512963] audit: initializing netlink socket (disabled)
[ 0.512980] type=2000 audit(1261176501.512:1): initialized
[ 0.521594] highmem bounce pool size: 64 pages
[ 0.521600] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.523026] VFS: Disk quotas dquot_6.5.2
[ 0.523087] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.523621] fuse init (API version 7.12)
[ 0.523701] msgmni has been set to 1681
[ 0.523895] alg: No test for stdrng (krng)
[ 0.523904] io scheduler noop registered
[ 0.523906] io scheduler anticipatory registered
[ 0.523908] io scheduler deadline registered
[ 0.523948] io scheduler cfq registered (default)
[ 0.523961] pci 0000:00:02.0: Boot video device
[ 0.524445] alloc irq_desc for 24 on node -1
[ 0.524447] alloc kstat_irqs on node -1
[ 0.524459] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.524471] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.524635] alloc irq_desc for 25 on node -1
[ 0.524637] alloc kstat_irqs on node -1
[ 0.524646] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.524657] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.524760] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.525128] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id
2940 ss_vid 0 ss_did 0
[ 0.525173] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[ 0.525197] pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id
2942 ss_vid 0 ss_did 0
[ 0.525235] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
[ 0.525243] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.528825] ACPI: AC Adapter [ADP1] (on-line)
[ 0.528889] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.528893] ACPI: Power Button [PWRF]
[ 0.528942] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.531974] ACPI: Lid Switch [LID0]
[ 0.532020] input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.532027] ACPI: Sleep Button [SLPB]
[ 0.532879] ACPI: SSDT bbbb3c98 00223 (v01 PmRef Cpu0Ist 00003000
INTL 20051117)
[ 0.533485] ACPI: SSDT bbbb1598 00537 (v01 PmRef Cpu0Cst 00003001
INTL 20051117)
[ 0.534002] Monitor-Mwait will be used to enter C-1 state
[ 0.534026] Monitor-Mwait will be used to enter C-2 state
[ 0.534034] Marking TSC unstable due to TSC halts in idle
[ 0.534048] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 0.534072] processor LNXCPU:00: registered as cooling_device0
[ 0.534076] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.534567] ACPI: SSDT bbbb2e18 001CF (v01 PmRef ApIst 00003000
INTL 20051117)
[ 0.535060] ACPI: SSDT bbbb3f18 0008D (v01 PmRef ApCst 00003000
INTL 20051117)
[ 0.535668] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 0.535693] processor LNXCPU:01: registered as cooling_device1
[ 0.535696] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.569246] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.569255] ACPI: Thermal Zone [TZS0] (27 C)
[ 0.582396] thermal LNXTHERM:02: registered as thermal_zone1
[ 0.582404] ACPI: Thermal Zone [TZS1] (27 C)
[ 0.582462] isapnp: Scanning for PnP cards...
[ 0.886630] ACPI: Battery Slot [BAT0] (battery present)
[ 0.937775] isapnp: No Plug & Play device found
[ 0.938936] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.940211] brd: module loaded
[ 0.940638] loop: module loaded
[ 0.940710] input: Macintosh mouse button emulation as
/devices/virtual/input/input3
[ 0.940782] ahci 0000:00:1f.2: version 3.0
[ 0.940798] alloc irq_desc for 23 on node -1
[ 0.940800] alloc kstat_irqs on node -1
[ 0.940807] ahci 0000:00:1f.2: PCI INT B -> GSI 23 (level, low) ->
IRQ 23
[ 0.940843] alloc irq_desc for 26 on node -1
[ 0.940845] alloc kstat_irqs on node -1
[ 0.940854] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X
[ 0.940908] ahci: SSS flag set, parallel bus scan disabled
[ 0.940948] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps
0x33 impl SATA mode
[ 0.940951] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led
clo pmp pio slum part ems
[ 0.940957] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.964087] scsi0 : ahci
[ 0.964197] scsi1 : ahci
[ 0.964256] scsi2 : ahci
[ 0.964313] scsi3 : ahci
[ 0.964372] scsi4 : ahci
[ 0.964429] scsi5 : ahci
[ 0.964677] ata1: SATA max UDMA/133 abar m2048 at 0xd4705000 port
0xd4705100 irq 26
[ 0.964681] ata2: SATA max UDMA/133 abar m2048 at 0xd4705000 port
0xd4705180 irq 26
[ 0.964683] ata3: DUMMY
[ 0.964684] ata4: DUMMY
[ 0.964687] ata5: SATA max UDMA/133 abar m2048 at 0xd4705000 port
0xd4705300 irq 26
[ 0.964691] ata6: SATA max UDMA/133 abar m2048 at 0xd4705000 port
0xd4705380 irq 26
[ 0.965577] Fixed MDIO Bus: probed
[ 0.965613] PPP generic driver version 2.4.2
[ 0.965715] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.965737] alloc irq_desc for 18 on node -1
[ 0.965739] alloc kstat_irqs on node -1
[ 0.965746] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 18 (level, low)
-> IRQ 18
[ 0.965765] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.965768] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.965815] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned
bus number 1
[ 0.969726] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.969733] ehci_hcd 0000:00:1a.7: cache line size of 32 is not
supported
[ 0.969748] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xd4705c00
[ 0.984019] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.984092] usb usb1: configuration #1 chosen from 1 choice
[ 0.984119] hub 1-0:1.0: USB hub found
[ 0.984130] hub 1-0:1.0: 6 ports detected
[ 0.984198] ehci_hcd 0000:00:1d.7: PCI INT B -> GSI 18 (level, low)
-> IRQ 18
[ 0.984210] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.984213] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.984243] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 2
[ 0.988157] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.988164] ehci_hcd 0000:00:1d.7: cache line size of 32 is not
supported
[ 0.988169] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xd4705800
[ 1.004014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.004084] usb usb2: configuration #1 chosen from 1 choice
[ 1.004109] hub 2-0:1.0: USB hub found
[ 1.004116] hub 2-0:1.0: 6 ports detected
[ 1.004174] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.004191] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.004223] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 18 (level, low)
-> IRQ 18
[ 1.004230] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.004234] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.004263] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned
bus number 3
[ 1.004292] uhci_hcd 0000:00:1a.0: irq 18, io base 0x000050e0
[ 1.004369] usb usb3: configuration #1 chosen from 1 choice
[ 1.004394] hub 3-0:1.0: USB hub found
[ 1.004400] hub 3-0:1.0: 2 ports detected
[ 1.004449] alloc irq_desc for 19 on node -1
[ 1.004451] alloc kstat_irqs on node -1
[ 1.004456] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 1.004463] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.004466] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.004495] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned
bus number 4
[ 1.004530] uhci_hcd 0000:00:1a.1: irq 19, io base 0x000050c0
[ 1.004606] usb usb4: configuration #1 chosen from 1 choice
[ 1.004630] hub 4-0:1.0: USB hub found
[ 1.004636] hub 4-0:1.0: 2 ports detected
[ 1.004681] alloc irq_desc for 17 on node -1
[ 1.004683] alloc kstat_irqs on node -1
[ 1.004687] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 17 (level, low)
-> IRQ 17
[ 1.004694] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.004697] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.004725] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned
bus number 5
[ 1.004760] uhci_hcd 0000:00:1a.2: irq 17, io base 0x000050a0
[ 1.004838] usb usb5: configuration #1 chosen from 1 choice
[ 1.004863] hub 5-0:1.0: USB hub found
[ 1.004868] hub 5-0:1.0: 2 ports detected
[ 1.004915] uhci_hcd 0000:00:1d.0: PCI INT B -> GSI 18 (level, low)
-> IRQ 18
[ 1.004921] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.004925] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.004958] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 6
[ 1.004986] uhci_hcd 0000:00:1d.0: irq 18, io base 0x00005080
[ 1.005061] usb usb6: configuration #1 chosen from 1 choice
[ 1.005087] hub 6-0:1.0: USB hub found
[ 1.005093] hub 6-0:1.0: 2 ports detected
[ 1.005144] uhci_hcd 0000:00:1d.1: PCI INT C -> GSI 19 (level, low)
-> IRQ 19
[ 1.005152] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.005156] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.005187] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 7
[ 1.005215] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005060
[ 1.005288] usb usb7: configuration #1 chosen from 1 choice
[ 1.005315] hub 7-0:1.0: USB hub found
[ 1.005321] hub 7-0:1.0: 2 ports detected
[ 1.005369] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 17 (level, low)
-> IRQ 17
[ 1.005376] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.005379] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.005408] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 8
[ 1.005435] uhci_hcd 0000:00:1d.2: irq 17, io base 0x00005040
[ 1.005510] usb usb8: configuration #1 chosen from 1 choice
[ 1.005535] hub 8-0:1.0: USB hub found
[ 1.005541] hub 8-0:1.0: 2 ports detected
[ 1.005633] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 1.024891] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.036257] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.036263] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.036266] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.036269] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.036271] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.036334] mice: PS/2 mouse device common for all mice
[ 1.036459] rtc_cmos 00:03: RTC can wake from S4
[ 1.036493] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.036537] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.036639] device-mapper: uevent: version 1.0.3
[ 1.037256] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01)
initialised: dm-devel at redhat.com
[ 1.037339] device-mapper: multipath: version 1.1.0 loaded
[ 1.037342] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.037461] EISA: Probing bus 0 at eisa.0
[ 1.037471] Cannot allocate resource for EISA slot 2
[ 1.037473] Cannot allocate resource for EISA slot 3
[ 1.037475] Cannot allocate resource for EISA slot 4
[ 1.037477] Cannot allocate resource for EISA slot 5
[ 1.037492] EISA: Detected 0 cards.
[ 1.037638] cpuidle: using governor ladder
[ 1.037728] cpuidle: using governor menu
[ 1.038205] TCP cubic registered
[ 1.038353] NET: Registered protocol family 10
[ 1.038797] lo: Disabled Privacy Extensions
[ 1.039123] NET: Registered protocol family 17
[ 1.039140] Bluetooth: L2CAP ver 2.13
[ 1.039142] Bluetooth: L2CAP socket layer initialized
[ 1.039145] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.039147] Bluetooth: SCO socket layer initialized
[ 1.039181] Bluetooth: RFCOMM TTY layer initialized
[ 1.039183] Bluetooth: RFCOMM socket layer initialized
[ 1.039185] Bluetooth: RFCOMM ver 1.11
[ 1.039650] Using IPI No-Shortcut mode
[ 1.039712] PM: Resume from disk failed.
[ 1.039724] registered taskstats version 1
[ 1.039844] Magic number: 5:512:856
[ 1.039941] rtc_cmos 00:03: setting system clock to 2009-12-18
22:48:22 UTC (1261176502)
[ 1.039944] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.039946] EDD information not available.
[ 1.060589] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input4
[ 1.316822] usb 1-3: new high speed USB device using ehci_hcd and
address 2
[ 1.458980] usb 1-3: configuration #1 chosen from 1 choice
[ 1.480053] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.482218] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 rejected by device
(Stat=0x51 Err=0x04)
[ 1.482224] ata1.00: ATA-8: ST9320320AS, HP07, max UDMA/100
[ 1.482227] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth
31/32)
[ 1.484653] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 rejected by device
(Stat=0x51 Err=0x04)
[ 1.484677] ata1.00: configured for UDMA/100
[ 1.500039] Clocksource tsc unstable (delta = -250883819 ns)
[ 1.500179] scsi 0:0:0:0: Direct-Access ATA ST9320320AS
HP07 PQ: 0 ANSI: 5
[ 1.500300] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.500338] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320
GB/298 GiB)
[ 1.500381] sd 0:0:0:0: [sda] Write Protect is off
[ 1.500384] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.500406] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.500538] sda: sda1 sda2 sda3 <
[ 1.572039] usb 1-5: new high speed USB device using ehci_hcd and
address 3
[ 1.719261] sda5
[ 1.739231] usb 1-5: configuration #1 chosen from 1 choice
[ 1.763079] sda6 sda7 sda8 >
[ 1.844571] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.128034] usb 8-1: new low speed USB device using uhci_hcd and
address 2
[ 2.304536] usb 8-1: configuration #1 chosen from 1 choice
[ 2.388070] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.403950] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 rejected by device
(Stat=0x51 Err=0x04)
[ 2.403954] ata2.00: ATAPI: Slimtype DVD A DS8A2L-A, 7H63, max UDMA/100
[ 2.419824] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 rejected by device
(Stat=0x51 Err=0x04)
[ 2.419852] ata2.00: configured for UDMA/100
[ 2.438889] scsi 1:0:0:0: CD-ROM Slimtype DVD A DS8A2L-A
7H63 PQ: 0 ANSI: 5
[ 2.447670] sr0: scsi3-mmc drive: 24x/6x writer dvd-ram cd/rw
xa/form2 cdda pop-up
[ 2.447674] Uniform CD-ROM driver Revision: 3.20
[ 2.447753] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.447795] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.764073] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.100064] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.116090] Freeing unused kernel memory: 540k freed
[ 3.116398] Write protecting the kernel text: 4568k
[ 3.116451] Write protecting the kernel read-only data: 1836k
[ 3.278250] Linux agpgart interface v0.103
[ 3.281000] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45
Express Chipset
[ 3.281442] agpgart-intel 0000:00:00.0: detected 65532K stolen memory
[ 3.284431] agpgart-intel 0000:00:00.0: AGP aperture is 256M @
0xc0000000
[ 3.322461] [drm] Initialized drm 1.1.0 20060810
[ 3.362035] alloc irq_desc for 16 on node -1
[ 3.362040] alloc kstat_irqs on node -1
[ 3.362048] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 3.362053] i915 0000:00:02.0: setting latency timer to 64
[ 3.367515] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.367539] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 3.367585] r8169 0000:01:00.0: setting latency timer to 64
[ 3.367643] alloc irq_desc for 27 on node -1
[ 3.367646] alloc kstat_irqs on node -1
[ 3.367662] r8169 0000:01:00.0: irq 27 for MSI/MSI-X
[ 3.368387] eth0: RTL8102e at 0xf80fa000, 00:1f:16:62:ba:a2, XID
34a00000 IRQ 27
[ 3.371732] Initializing USB Mass Storage driver...
[ 3.382166] scsi6 : SCSI emulation for USB Mass Storage devices
[ 3.382220] usbcore: registered new interface driver hiddev
[ 3.382825] usb-storage: device found at 2
[ 3.382827] usb-storage: waiting for device to settle before scanning
[ 3.382841] usbcore: registered new interface driver usb-storage
[ 3.382844] USB Mass Storage support registered.
[ 3.383225] alloc irq_desc for 28 on node -1
[ 3.383228] alloc kstat_irqs on node -1
[ 3.383237] i915 0000:00:02.0: irq 28 for MSI/MSI-X
[ 3.395721] input: Logitech USB-PS/2 Optical Mouse as
/devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input5
[ 3.395798] generic-usb 0003:046D:C044.0001: input,hidraw0: USB HID
v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-1/input0
[ 3.395816] usbcore: registered new interface driver usbhid
[ 3.395819] usbhid: v2.6:USB HID core driver
[ 3.490356] [drm] i2c_init DPDDC-B
[ 3.500043] [drm] i2c_init DPDDC-D
[ 3.618156] i2c-adapter i2c-2: unable to read EDID block.
[ 3.618160] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 4.242302] [drm] TV-20: set mode NTSC 480i 0
[ 4.367713] [drm] fb0: inteldrmfb frame buffer device
[ 4.407298] acpi device:04: registered as cooling_device2
[ 4.407556] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input6
[ 4.407593] ACPI: Video Device [OVGA] (multi-head: yes rom: no
post: no)
[ 4.407621] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on
minor 0
[ 4.473762] [drm] LVDS-8: set mode 1366x768 1d
[ 4.629984] Console: switching to colour frame buffer device 170x48
[ 4.944270] PM: Starting manual resume from disk
[ 4.944274] PM: Resume from partition 8:8
[ 4.944276] PM: Checking hibernation image.
[ 4.944530] PM: Resume from disk failed.
[ 4.949514] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 4.949517] EXT3-fs: write access will be enabled during recovery.
[ 8.380372] usb-storage: device scan complete
[ 8.382327] scsi 6:0:0:0: Direct-Access Generic- Multi-Card
1.00 PQ: 0 ANSI: 0 CCS
[ 8.382716] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 8.386941] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 30.526750] kjournald starting. Commit interval 5 seconds
[ 30.526782] EXT3-fs: sda7: orphan cleanup on readonly fs
[ 30.526788] ext3_orphan_cleanup: deleting unreferenced inode 4325416
[ 30.577546] EXT3-fs: sda7: 1 orphan inode deleted
[ 30.577548] EXT3-fs: recovery complete.
[ 30.585840] EXT3-fs: mounted filesystem with writeback data mode.
[ 32.577993] type=1505 audit(1261176534.036:2):
operation="profile_load" pid=465 name=/usr/share/gdm/guest-session/Xsession
[ 32.593969] type=1505 audit(1261176534.052:3):
operation="profile_load" pid=466 name=/sbin/dhclient3
[ 32.594696] type=1505 audit(1261176534.052:4):
operation="profile_load" pid=466
name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 32.595088] type=1505 audit(1261176534.052:5):
operation="profile_load" pid=466
name=/usr/lib/connman/scripts/dhclient-script
[ 32.629763] type=1505 audit(1261176534.088:6):
operation="profile_load" pid=467 name=/usr/bin/evince
[ 32.641564] type=1505 audit(1261176534.100:7):
operation="profile_load" pid=467 name=/usr/bin/evince-previewer
[ 32.648542] type=1505 audit(1261176534.108:8):
operation="profile_load" pid=467 name=/usr/bin/evince-thumbnailer
[ 32.688800] type=1505 audit(1261176534.148:9):
operation="profile_load" pid=469 name=/usr/lib/cups/backend/cups-pdf
[ 32.689650] type=1505 audit(1261176534.148:10):
operation="profile_load" pid=469 name=/usr/sbin/cupsd
[ 32.704336] type=1505 audit(1261176534.164:11):
operation="profile_load" pid=470 name=/usr/sbin/mysqld
[ 34.073633] Adding 5719100k swap on /dev/sda8. Priority:-1 extents:1
across:5719100k
[ 34.080600] usbfs: unrecognised mount option "none" or missing value
[ 34.080605] usbfs: mount parameter error.
[ 34.484439] EXT3 FS on sda7, internal journal
[ 36.474116] udev: starting version 147
[ 43.734185] r8169: eth0: link up
[ 43.734206] r8169: eth0: link up
[ 49.350731] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 49.384075] cfg80211: Calling CRDA to update world regulatory domain
[ 49.772083] Linux video capture interface: v2.00
[ 50.037638] uvcvideo: Found UVC 1.00 device HP Webcam-101 (064e:a102)
[ 50.054035] input: HP Webcam-101 as
/devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.0/input/input7
[ 50.054084] usbcore: registered new interface driver uvcvideo
[ 50.054087] USB Video Class driver (v0.1.0)
[ 52.272306] lp: driver loaded but no devices found
[ 54.004015] eth0: no IPv6 routers present
[ 55.199577] ath5k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) ->
IRQ 17
[ 55.199592] ath5k 0000:02:00.0: setting latency timer to 64
[ 55.199628] ath5k 0000:02:00.0: registered as 'phy0'
[ 55.292935] ath: EEPROM regdomain: 0x64
[ 55.292938] ath: EEPROM indicates we should expect a direct regpair map
[ 55.292942] ath: Country alpha2 being used: 00
[ 55.292943] ath: Regpair used: 0x64
[ 56.069825] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1a0b1, caps:
0xd04711/0xa00000
[ 56.130571] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio2/input/input8
[ 56.832723] phy0: Selected rate control algorithm 'minstrel'
[ 56.833415] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 57.001019] cfg80211: World regulatory domain updated:
[ 57.001023] (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 57.001026] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 57.001029] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 57.001031] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 57.001034] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 57.001036] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 60.940455] alloc irq_desc for 22 on node -1
[ 60.940459] alloc kstat_irqs on node -1
[ 60.940466] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low)
-> IRQ 22
[ 60.940519] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 61.682931] input: HDA Intel Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 61.683016] input: HDA Intel Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 61.683077] input: HDA Intel Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 88.340018] i2c-adapter i2c-2: unable to read EDID block.
[ 88.340022] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 88.344707] i2c-adapter i2c-2: unable to read EDID block.
[ 88.344709] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 88.390422] [drm] TV-20: set mode NTSC 480i 0
[ 88.530823] [drm] TV-20: set mode NTSC 480i 0
[ 88.980248] i2c-adapter i2c-2: unable to read EDID block.
[ 88.980253] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 88.984930] i2c-adapter i2c-2: unable to read EDID block.
[ 88.984933] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 89.030629] [drm] TV-20: set mode NTSC 480i 0
[ 89.171024] [drm] TV-20: set mode NTSC 480i 0
[ 108.549138] CPU0 attaching NULL sched-domain.
[ 108.549145] CPU1 attaching NULL sched-domain.
[ 108.560580] CPU0 attaching sched-domain:
[ 108.560585] domain 0: span 0-1 level MC
[ 108.560587] groups: 0 1
[ 108.560594] CPU1 attaching sched-domain:
[ 108.560596] domain 0: span 0-1 level MC
[ 108.560598] groups: 1 0
[ 112.446636] i2c-adapter i2c-2: unable to read EDID block.
[ 112.446640] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 112.451158] i2c-adapter i2c-2: unable to read EDID block.
[ 112.451161] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 112.496885] [drm] TV-20: set mode NTSC 480i 0
[ 112.636969] [drm] TV-20: set mode NTSC 480i 0
[ 112.882642] i2c-adapter i2c-2: unable to read EDID block.
[ 112.882646] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 112.887436] i2c-adapter i2c-2: unable to read EDID block.
[ 112.887439] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 112.933145] [drm] TV-20: set mode NTSC 480i 0
[ 113.073712] [drm] TV-20: set mode NTSC 480i 0
[ 113.318616] i2c-adapter i2c-2: unable to read EDID block.
[ 113.318620] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 113.323299] i2c-adapter i2c-2: unable to read EDID block.
[ 113.323302] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 113.369008] [drm] TV-20: set mode NTSC 480i 0
[ 113.509150] [drm] TV-20: set mode NTSC 480i 0
[ 167.146639] i2c-adapter i2c-2: unable to read EDID block.
[ 167.146643] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 167.151181] i2c-adapter i2c-2: unable to read EDID block.
[ 167.151185] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 167.196916] [drm] TV-20: set mode NTSC 480i 0
[ 167.337083] [drm] TV-20: set mode NTSC 480i 0
[ 167.577007] i2c-adapter i2c-2: unable to read EDID block.
[ 167.577011] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 167.583073] i2c-adapter i2c-2: unable to read EDID block.
[ 167.583076] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 167.628800] [drm] TV-20: set mode NTSC 480i 0
[ 167.769911] [drm] TV-20: set mode NTSC 480i 0
[ 168.003367] i2c-adapter i2c-2: unable to read EDID block.
[ 168.003373] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 168.008159] i2c-adapter i2c-2: unable to read EDID block.
[ 168.008162] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 168.053899] [drm] TV-20: set mode NTSC 480i 0
[ 168.194009] [drm] TV-20: set mode NTSC 480i 0
[ 184.158618] i2c-adapter i2c-2: unable to read EDID block.
[ 184.158623] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 184.163412] i2c-adapter i2c-2: unable to read EDID block.
[ 184.163415] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 184.209118] [drm] TV-20: set mode NTSC 480i 0
[ 184.349202] [drm] TV-20: set mode NTSC 480i 0
[ 308.028799] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1833.900458] r8169: eth0: link down
[ 1839.038644] r8169: eth0: link up
[ 1839.128091] r8169: eth0: link up
[ 1839.364248] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1839.475857] r8169: eth0: link up
[ 1840.126291] r8169: eth0: link down
[ 1849.504026] eth0: no IPv6 routers present
[ 2036.271170] r8169: eth0: link up
More information about the Cialug
mailing list