[Cialug]linux compatible hardware

[Dan Hockey]

I downloaded and installed the lastest apcuspd, then I googled for 
"apcupsd gui" and I found a prog called
Apcupsdjcgf.jar. after changing some settings for konqueror I got it to 
where it seems to be working.
-dh
 
Nathan C. Smith wrote:
> I only use network printers anymore.  Most network printers will support lp
> printing which is probably all you need.  Most will support additional
> options too like port 9100/HP printing and all sorts of wacky stuff like
> SMTP printing.
>
> As long as you have PCL or PS compataibility the network stuff should work
> fine.
>
> -Nate
>
>   
>> -----Original Message-----
>> From: Dan Hockey [mailto:icepuck2k at mchsi.com] 
>> Sent: Wednesday, August 29, 2007 7:43 PM
>> To: 'Central Iowa Linux Users Group'
>> Subject: RE: [Cialug]linux compatible hardware
>>
>> I found an hp 1022 laserjet(on hp's`site) which is on the 
>> list of compatible printers and an hp 1022n(network 
>> compatilble) which isn't.
>> Is a network printer harder/or easier to use with linux? If I 
>> can find a network printer that's linux compatible I think 
>> that's the way I may end up going with.
>> -dh
>>
>> _______________________________________________
>> Cialug mailing list
>> Cialug at cialug.org
>> http://cialug.org/mailman/listinfo/cialug
>>
>>     
> _______________________________________________
> Cialug mailing list
> Cialug at cialug.org
> http://cialug.org/mailman/listinfo/cialug
>
>