[Cialug] Intel PRO/Wireless ipw3945

[Jesse Welling]

I'm using the ipw 3945 as well. I was using Ubuntu 6.06 up until
recently when Debian Etch came out. I had to enable the contrib and
non-free repositories though to get firmware-ipw3945 and ipw3945d.

I'm using revision 2 of the chipset...don't know if that would have
any effect....

You might find some more information from the sourceforge site if you
haven't tried that yet. I also found this
http://plug.phoenix.az.us/index.php?option=com_content&task=view&id=103&Itemid=27
 hope it helps.....

On 4/25/07, Jeffrey C. Ollie <jeff at ocjtech.us> wrote:
> On Wed, 2007-04-25 at 09:41 -0500, Tim Wilson wrote:
> > In my travails to get my Netgear card running under NDISWrapper, I
> > discovered that some kernels are using a 4k stack, and others are
> > using larger stacks.  Some cards/drivers require a larger stack
> > (reasons I don't understand).
>
> Windows uses an 8K stack I believe, so some Windows drivers use more
> than the 4K that Linux allocates which causes obvious problems.
>
> >   But, it might be worth a shot to see if
> > you can get a kernel with a bigger stack, or recompile it with a
> > bigger stack.  FWIW, I got my card running under OpenSuse, using an
> > alternate pre-compiled kernel.
>
> That shouldn't be necessary with the ipw3945 card - Intel has been very
> good recently about providing real open source drivers for their gear
> and getting them integrated upstream in the kernel and X.org.
>
> Jeff
>
>
> _______________________________________________
> Cialug mailing list
> Cialug at cialug.org
> http://cialug.org/mailman/listinfo/cialug
>
>
>