<4>Linux version 2.4.31 (root@box) (gcc version 2.95.4 20011002 (Debian prerelease)) #6 SMP Fri Oct 21 15:15:54 EDT 2005 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009f000 (usable) <4> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) <4> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 000000009f6d0000 (usable) <4> BIOS-e820: 000000009f6d0000 - 000000009f6df000 (ACPI data) <4> BIOS-e820: 000000009f6df000 - 000000009f700000 (ACPI NVS) <4> BIOS-e820: 000000009f700000 - 00000000a0000000 (reserved) <4> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) <4> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) <4> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) <4> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) <4> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) <4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) <4> BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) <5>1654MB HIGHMEM available. <5>896MB LOWMEM available. <4>found SMP MP-table at 000f67f0 <4>hm, page 000f6000 reserved twice. <4>hm, page 000f7000 reserved twice. <4>hm, page 0009f000 reserved twice. <4>hm, page 000a0000 reserved twice. <4>On node 0 totalpages: 653008 <4>zone(0): 4096 pages. <4>zone(1): 225280 pages. <4>zone(2): 423632 pages. <6>ACPI: RSDP (v002 LENOVO ) @ 0x000f67b0 <6>ACPI: XSDT (v001 LENOVO TP-7C 0x00002220 LTP 0x00000000) @ 0x9f6d148e <6>ACPI: FADT (v003 LENOVO TP-7C 0x00002220 LNVO 0x00000001) @ 0x9f6d1600 <6>ACPI: SSDT (v001 LENOVO TP-7C 0x00002220 MSFT 0x0100000e) @ 0x9f6d17b4 <6>ACPI: ECDT (v001 LENOVO TP-7C 0x00002220 LNVO 0x00000001) @ 0x9f6dedd7 <6>ACPI: TCPA (v002 LENOVO TP-7C 0x00002220 LNVO 0x00000001) @ 0x9f6dee29 <6>ACPI: MADT (v001 LENOVO TP-7C 0x00002220 LNVO 0x00000001) @ 0x9f6dee5b <6>ACPI: MCFG (v001 LENOVO TP-7C 0x00002220 LNVO 0x00000001) @ 0x9f6deec3 <6>ACPI: HPET (v001 LENOVO TP-7C 0x00002220 LNVO 0x00000001) @ 0x9f6deeff <6>ACPI: BOOT (v001 LENOVO TP-7C 0x00002220 LTP 0x00000001) @ 0x9f6defd8 <6>ACPI: SSDT (v001 LENOVO TP-7C 0x00002220 INTL 0x20050513) @ 0x9f6f2655 <6>ACPI: SSDT (v001 LENOVO TP-7C 0x00002220 INTL 0x20050513) @ 0x9f6f28b4 <6>ACPI: SSDT (v001 LENOVO TP-7C 0x00002220 INTL 0x20050513) @ 0x9f6f295a <6>ACPI: SSDT (v001 LENOVO TP-7C 0x00002220 INTL 0x20050513) @ 0x9f6f2e51 <6>ACPI: DSDT (v001 LENOVO TP-7C 0x00002220 MSFT 0x0100000e) @ 0x00000000 <6>ACPI: Local APIC address 0xfee00000 <6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) <4>Processor #0 Pentium(tm) Pro APIC version 20 <6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) <4>Processor #1 Pentium(tm) Pro APIC version 20 <6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) <6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) <6>ACPI: Skipping IOAPIC probe due to 'noapic' option. <6>Using ACPI for processor (LAPIC) configuration information <4>Intel MultiProcessor Specification v1.4 <4> Virtual Wire compatibility mode. <4>OEM ID: INTEL Product ID: Napa ERB APIC at: 0xFEE00000 <4>I/O APIC #2 Version 32 at 0xFEC00000. <4>Enabling APIC mode: Flat. Using 1 I/O APICs <4>Processors: 2 <4>Kernel command line: ramdisk_size=100000 init=/etc/init lang=us apm=power-off vga=791 initrd=minirt24.gz nomce noapic qemu quiet BOOT_IMAGE=knoppix frugal BOOT_IMAGE=linux24 <6>Initializing CPU#0 <4>Detected 1662.534 MHz processor. <4>Console: colour dummy device 80x25 <4>Calibrating delay loop... 3316.12 BogoMIPS <6>Memory: 2577500k/2612032k available (1386k kernel code, 34144k reserved, 567k data, 144k init, 1694528k highmem) <6>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) <6>Inode cache hash table entries: 262144 (order: 9, 2097152 bytes) <6>Mount cache hash table entries: 512 (order: 0, 4096 bytes) <6>Buffer cache hash table entries: 262144 (order: 8, 1048576 bytes) <4>Page-cache hash table entries: 524288 (order: 9, 2097152 bytes) <6>CPU: L1 I cache: 32K, L1 D cache: 32K <6>CPU: Physical Processor ID: 0 <7>CPU: After generic, caps: bfe9fbff 00100000 00000000 00000000 <7>CPU: Common caps: bfe9fbff 00100000 00000000 00000000 <6>Enabling fast FPU save and restore... done. <6>Enabling unmasked SIMD FPU exception support... done. <6>Checking 'hlt' instruction... OK. <6>Checking for popad bug... OK. <4>ACPI: IRQ9 SCI: Edge set to Level Trigger. <4>POSIX conformance testing by UNIFIX <4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) <4>mtrr: detected mtrr type: Intel <6>CPU: L1 I cache: 32K, L1 D cache: 32K <6>CPU: Physical Processor ID: 0 <7>CPU: After generic, caps: bfe9fbff 00100000 00000000 00000000 <7>CPU: Common caps: bfe9fbff 00100000 00000000 00000000 <4>CPU0: Intel Genuine Intel(R) CPU T2300 @ 1.66GHz stepping 08 <4>per-CPU timeslice cutoff: 182.85 usecs. <4>enabled ExtINT on CPU#0 <4>ESR value before enabling vector: 00000040 <4>ESR value after enabling vector: 00000000 <4>Booting processor 1/1 eip 3000 <6>Initializing CPU#1 <4>masked ExtINT on CPU#1 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Calibrating delay loop... 3322.67 BogoMIPS <6>CPU: L1 I cache: 32K, L1 D cache: 32K <6>CPU: Physical Processor ID: 0 <7>CPU: After generic, caps: bfe9fbff 00100000 00000000 00000000 <7>CPU: Common caps: bfe9fbff 00100000 00000000 00000000 <4>CPU1: Intel Genuine Intel(R) CPU T2300 @ 1.66GHz stepping 08 <6>Total of 2 processors activated (6638.79 BogoMIPS). <4>cpu_sibling_map[0] = 1 <4>cpu_sibling_map[1] = 0 <4>Using local APIC timer interrupts. <4>calibrating APIC timer ... <4>..... CPU clock speed is 1662.6913 MHz. <4>..... host bus clock speed is 166.2689 MHz. <4>cpu: 0, clocks: 1662689, slice: 554229 <4>CPU0 <4>cpu: 1, clocks: 1662689, slice: 554229 <4>CPU1 <4>checking TSC synchronization across CPUs: <4>BIOS BUG: CPU#0 improperly initialized, has -142 usecs TSC skew! FIXED. <4>BIOS BUG: CPU#1 improperly initialized, has 142 usecs TSC skew! FIXED. <4>Waiting on wait_init_idle (map = 0x2) <4>All processors have done init_idle <6>ACPI: Subsystem revision 20040326 <6>PCI: PCI BIOS revision 2.10 entry at 0xfd82b, last bus=24 <6>PCI: Using configuration type 1 <3>schedule_task(): keventd has not started <6>ACPI: Found ECDT <3>schedule_task(): keventd has not started <6>ACPI: Interpreter enabled <6>ACPI: Using PIC for interrupt routing <6>ACPI: System [ACPI] (supports S0 S3 S4 S5) <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) <4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) <4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) <4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) <4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) <4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) <4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) <6>ACPI: PCI Root Bridge [PCI0] (00:00) <4>PCI: Probing PCI hardware (bus 00) <6>PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 <4>Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <6>ACPI: Embedded Controller [EC] (gpe 28) <3>schedule_task(): keventd has not started <6>ACPI: Power Resource [PUBS] (on) <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] <6>PCI: Probing PCI hardware <4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 <4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 <4>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 <4>ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 <4>ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11 <4>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 <4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 <4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 <6>PCI: Using ACPI for IRQ routing <6>isapnp: Scanning for PnP cards... <6>isapnp: No Plug & Play device found <6>Linux NET4.0 for Linux 2.4 <6>Based upon Swansea University Computer Society NET3.039 <4>Initializing RT netlink socket <4>Starting kswapd <4>allocated 32 pages and 32 bhs reserved for the highmem bounces <5>VFS: Disk quotas vdquot_6.5.1 <6>vesafb: framebuffer at 0xd0000000, mapped to 0xf882d000, size 3072k <6>vesafb: mode is 1024x768x16, linelength=2048, pages=4 <6>vesafb: protected mode interface info at a5f3:1f5f <6>vesafb: scrolling: redraw <6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 <4>Console: switching to colour frame buffer device 128x48 <6>fb0: VESA VGA frame buffer device <4>pty: 256 Unix98 ptys configured <4>floppy0: no floppy controllers found <4>RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize <6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <4>hda: HL-DT-STCD-RW/DVD DRIVE GCC-4244N, ATAPI CD/DVD-ROM drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <4>ide: late registration of driver. <6>SCSI subsystem driver Revision: 1.00 <3>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 <3>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 <6>Initializing Cryptographic API <6>NET4: Linux TCP/IP 1.0 for NET4.0 <6>IP Protocols: ICMP, UDP, TCP, IGMP <6>IP: routing cache hash table of 32768 buckets, 256Kbytes <6>TCP: Hash tables configured (established 262144 bind 65536) <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. <5>RAMDISK: Compressed image found at block 0 <6>Freeing initrd memory: 840k freed <4>EXT2-fs warning: checktime reached, running e2fsck is recommended <4>VFS: Mounted root (ext2 filesystem). <4>hda: attached ide-scsi driver. <6>scsi0 : SCSI host adapter emulation for IDE ATAPI devices <4> Vendor: HL-DT-ST Model: RW/DVD GCC-4244N Rev: 1.02 <4> Type: CD-ROM ANSI SCSI revision: 02 <4>Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 <4>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray <6>Uniform CD-ROM driver Revision: 3.12 <6>usb.c: registered new driver usbdevfs <6>usb.c: registered new driver hub <7>PCI: Setting latency timer of device 00:1d.7 to 64 <6>ehci_hcd 00:1d.7: PCI device 8086:27cc (Intel Corp.) <6>ehci_hcd 00:1d.7: irq 11, pci mem f8b4a000 <6>usb.c: new USB bus registered, assigned bus number 1 <6>ehci_hcd 00:1d.7: enabled 64bit PCI DMA <7>PCI: cache line size of 32 is not supported by device 00:1d.7 <6>ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4 <6>hub.c: USB hub found <6>hub.c: 8 ports detected <6>usb-uhci.c: $Revision: 1.275 $ time 14:05:13 Aug 18 2005 <6>usb-uhci.c: High bandwidth mode enabled <7>PCI: Setting latency timer of device 00:1d.0 to 64 <6>usb-uhci.c: USB UHCI at I/O 0x1820, IRQ 11 <4>usb-uhci.c: Detected 2 ports <6>usb.c: new USB bus registered, assigned bus number 2 <6>hub.c: USB hub found <6>hub.c: 2 ports detected <7>PCI: Setting latency timer of device 00:1d.1 to 64 <6>usb-uhci.c: USB UHCI at I/O 0x1840, IRQ 11 <4>usb-uhci.c: Detected 2 ports <6>usb.c: new USB bus registered, assigned bus number 3 <6>hub.c: USB hub found <6>hub.c: 2 ports detected <7>PCI: Setting latency timer of device 00:1d.2 to 64 <6>usb-uhci.c: USB UHCI at I/O 0x1860, IRQ 11 <4>usb-uhci.c: Detected 2 ports <6>usb.c: new USB bus registered, assigned bus number 4 <6>hub.c: USB hub found <6>hub.c: 2 ports detected <7>PCI: Setting latency timer of device 00:1d.3 to 64 <6>usb-uhci.c: USB UHCI at I/O 0x1880, IRQ 11 <4>usb-uhci.c: Detected 2 ports <6>usb.c: new USB bus registered, assigned bus number 5 <6>hub.c: USB hub found <6>hub.c: 2 ports detected <6>usb-uhci.c: v1.275:USB Universal Host Controller Interface driver <6>Initializing USB Mass Storage driver... <6>usb.c: registered new driver usb-storage <6>USB Mass Storage support registered. <6>hub.c: new USB device 00:1d.7-2, assigned address 2 <6>scsi1 : SCSI emulation for USB Mass Storage devices <4> Vendor: SanDisk Model: U3 Cruzer Micro Rev: 8.02 <4> Type: Direct-Access ANSI SCSI revision: 02 <4>Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0 <4>SCSI device sda: 3907583 512-byte hdwr sectors (2001 MB) <4>sda: Write Protect is off <6>Partition check: <6> sda: sda1 <7>WARNING: USB Mass Storage data integrity not assured <7>USB Mass Storage device found at 2 <6>hub.c: new USB device 00:1d.3-2, assigned address 2 <4>usb.c: USB device 2 (vend/prod 0x483/0x2016) is not claimed by any active driver. <3>ide-scsi: hda: unsupported command in request queue (0) <4>end_request: I/O error, dev 03:00 (hda), sector 64 <4>isofs_read_super: bread failed, dev=03:00, iso_blknum=16, block=32 <3>ide-scsi: hda: unsupported command in request queue (0) <4>end_request: I/O error, dev 03:00 (hda), sector 2 <4>EXT2-fs: unable to read superblock <3>ide-scsi: hda: unsupported command in request queue (0) <4>end_request: I/O error, dev 03:00 (hda), sector 0 <4>FAT: unable to read boot sector <6>cdrom: open failed. <6>cdrom: open failed. <6>cdrom: open failed. <3>ide-scsi: hda: unsupported command in request queue (0) <4>end_request: I/O error, dev 03:00 (hda), sector 64 <4>isofs_read_super: bread failed, dev=03:00, iso_blknum=16, block=32 <3>ide-scsi: hda: unsupported command in request queue (0) <4>end_request: I/O error, dev 03:00 (hda), sector 2 <4>EXT2-fs: unable to read superblock <3>ide-scsi: hda: unsupported command in request queue (0) <4>end_request: I/O error, dev 03:00 (hda), sector 0 <4>FAT: unable to read boot sector <4>Unable to identify CD-ROM format. <4>VFS: Can't find ext2 filesystem on dev sd(8,1). <4>cloop: Initializing cloop v2.01 <6>cloop: loaded (max 128 devices) <4>cloop: /cdrom/KNOPPIX/KNOPPIX: 1961 blocks, 65536 bytes/block, largest block is 65552 bytes. <7>ISO 9660 Extensions: RRIP_1991A <6>Freeing unused kernel memory: 144k freed <6>Real Time Clock Driver v1.10f <6>ACPI: AC Adapter [AC] (on-line) <6>ACPI: Battery Slot [BAT0] (battery present) <6>ACPI: Power Button (FF) [PWRF] <6>ACPI: Lid Switch [LID] <6>ACPI: Sleep Button (CM) [SLPB] <6>ACPI: Processor [CPU0] (supports C1, 8 throttling states) <6>ACPI: Processor [CPU1] (supports C1, 8 throttling states) <6>ACPI: Thermal Zone [THM0] (27 C) <6>ACPI: Thermal Zone [THM1] (29 C) <6>Linux Kernel Card Services 3.1.22 <6> options: [pci] [cardbus] [pm] <5>ds: no socket drivers loaded! <6>Yenta ISA IRQ mask 0x04f8, PCI irq 11 <6>Socket status: 30000007 <4>usbdevfs: remount parameter error <6>Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled <3>hw_random: RNG not detected <6>tg3.c:v3.26 (April 24, 2005) <7>PCI: Setting latency timer of device 02:00.0 to 64 <6>eth0: Tigon3 [partno(BCM95751m) rev 4201 PHY(5750)] (PCIX:100MHz:32-bit) 10/100/1000BaseT Ethernet 00:0a:e4:c7:b6:4d <6>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[0] <6>eth0: dma_rwctrl[76180000] <4>Registering unionfs 1.0.14 <6>usb.c: registered new driver hiddev <6>usb.c: registered new driver hid <6>hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <6>hid-core.c: USB HID support drivers <6>mice: PS/2 mouse device common for all mice <6>apm: BIOS not found.